Rohde & Schwarz FSV3000, User Manual

Page: 489 / 1489

Common measurement settings
R&S
®
FSVA3000/ R&S
®
FSV3000
489 User Manual 1178.8520.02 ─ 08
Remote command:
TRIG:SOUR PSE
, see
TRIGger[:SEQuence]:SOURce
on page 1129
SWE:EGAT:SOUR PSE
for gated triggering, see
[SENSe:]SWEep:EGATe:SOURce
on page 1133
Time ← Trigger Source
Triggers in a specified repetition interval.
See "Repetition Interval" on page 489.
Remote command:
TRIG:SOUR TIME
, see
TRIGger[:SEQuence]:SOURce
on page 1129
Trigger Level
Defines the trigger level for the specified trigger source.
For gated measurements, this setting also defines the gate level.
For details on supported trigger levels, see the instrument data sheet.
For time triggers, the repetition interval is defined. See "Repetition Interval"
on page 489.
Remote command:
TRIGger[:SEQuence]:LEVel:IFPower
on page 1128
TRIGger[:SEQuence]:LEVel:IQPower
on page 1128
TRIGger[:SEQuence]:LEVel[:EXTernal<port>]
on page 1127
TRIGger[:SEQuence]:LEVel:VIDeo
on page 1128
Repetition Interval
Defines the repetition interval for a time trigger.
The shortest interval is 1
μ
s. The granularity of the repetition interval is 1/256 MHz.
Set the repetition interval to the exact pulse period, burst length, frame length or other
repetitive signal characteristic. If the required interval cannot be set with the available
granularity, configure a multiple of the interval that can be set. Thus, the trigger
remains synchronized to the signal.
Remote command:
TRIGger[:SEQuence]:TIME:RINTerval
on page 1130
Drop-Out Time
Defines the time that the input signal must stay below the trigger level before triggering
again.
For more information on the drop-out time, see "Trigger drop-out time" on page 482.
Remote command:
TRIGger[:SEQuence]:DTIMe
on page 1126
Trigger Offset
Defines the time offset between the trigger event and the start of the sweep.
For more information, see "Trigger offset" on page 481.
Trigger and gate configuration