manualshive.com logo in svg

Rohde & Schwarz FSV3000, User Manual

Share
Download
Rohde & Schwarz FSV3000 User Manual Download Page 637

Data management

R&S

®

FSVA3000/ R&S

®

FSV3000

637

User Manual 1178.8520.02 ─ 08

Secure passwords

By default, the initial password for both the administrator account and the "Secure-
User" account is "894129". When the secure user mode is activated the first time after
installation, you are prompted to change the passwords for all user accounts to
improve system security. Although it is possible to continue without changing the pass-
words, it is strongly recommended that you do so.
You can change the password in Windows

 

10 for any user at any time via:

"Start > Settings > Account > SignIn Options > Password > Change"

To deactivate the secure user mode, the "SecureUser" must log off and a user with
administrator rights must log on.

Switching users when using the auto-login function

In the "Start" menu, select the arrow next to the "Shut down" button and then "Log off".
The "Login" dialog box is displayed, in which you can enter the different user account
name and password.

The secure user mode setting and auto-login is automatically deactivated when
another user logs on. The "SecureUser" is no longer available.

For users with administrator rights, the secure user mode setting is available in the
general system configuration settings (see 

"SecureUser Mode"

 

on page 748).

Remote control

Initially after installation of the R&S

 

FSV3-K33 option, secure user mode must be

enabled manually once before remote control is possible.

(See 

SYSTem:SECurity[:STATe]

.)

Manual activation is necessary to prompt for a change of passwords.

9.3

 

Storing and recalling instrument settings and mea-
surement data

Access

: "Save"/ "Open" icon in the toolbar

Possibly you would like to restore or repeat a measurement you performed under spe-
cific conditions on the instrument. Or you want to evaluate imported data in another
application on the R&S

 

FSV/A and would like to restore the measurement settings

applied during measurement. In these cases, you can store and recall instrument and
measurement settings, and possibly other related measurement data.

Two different methods are available for managing instrument settings:

●

Quick Save/Quick Recall - a defined set of instrument settings or channels are
stored or recalled quickly in just one step

Storing and recalling instrument settings and measurement data

Summary of Contents for FSV3000


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands