Rohde & Schwarz FSV3000, User Manual

Page: 1156 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1156 User Manual 1178.8520.02 ─ 08
See
TRACe<n>[:DATA]
on page 1162.
Suffix:
<n>
.
Window
Query parameters:
<Frames> CURRent
Returns the starting time of the current frame.
ALL
Returns the starting time for all frames. The results are sorted in
descending order, beginning with the current frame.
Return values:
<Seconds> Number of seconds that have passed since 01.01.1970 until the
frame start
<Nanoseconds> Number of nanoseconds that have passed in addition to the
<Seconds> since 01.01.1970 until the frame start.
<Reserved> The third value is reserved for future uses.
<Reserved> The fourth value is reserved for future uses.
Example: CALC:SGR:TST:DATA? ALL
Returns the starting times of all frames sorted in a descending
order.
Usage: Query only
Manual operation: See "Time Stamp" on page 603
CALCulate<n>:SGRam:TSTamp[:STATe] <State>
CALCulate<n>:SPECtrogram:TSTamp[:STATe] <State>
This command activates and deactivates the time stamp.
If the time stamp is active, some commands do not address frames as numbers, but as
(relative) time values:
●
CALCulate<n>:DELTamarker<m>:SPECtrogram:FRAMe
on page 1196
●
CALCulate<n>:MARKer<m>:SPECtrogram:FRAMe
on page 1192
●
CALCulate<n>:SPECtrogram:FRAMe:SELect
on page 1153
Suffix:
<n>
.
1..n
Window
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Analyzing measurements (basics)