Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1239
User Manual 1178.8520.02 ─ 08
CALCulate<n>:LIMit<li>:NAME
<Name>
This command selects a limit line that already exists or defines a name for a new limit
line.
Suffix:
<n>
.
<li>
Parameters:
<Name>
String containing the limit line name.
*RST:
REM1 to REM8 for lines 1 to 8
Manual operation:
See
CALCulate<n>:LIMit<li>:UNIT
<Unit>
This command defines the unit of a limit line.
Suffix:
<n>
.
irrelevant
<li>
Parameters:
<Unit>
DBM | DBPW | WATT | DBUV | DBMV | VOLT | DBUA |
AMPere | DB | DBUV_M | DBUA_M | DBM_mhz | DBUV_mhz |
DBMV_mhz | DBUa_mhz | DBUV_m | DBUa_m | DBUV_mmhz |
DBUa_mmhz | DBPW_mhz | DBPT_mhz | DBPT | (unitless)
If you select a dB-based unit for the limit line, the command
automatically turns the limit line into a relative limit line.
*RST:
DBM
Manual operation:
See
CALCulate<n>:LIMit<li>:UPPer[:DATA]
<LimitLinePoints>
This command defines the vertical definition points of an upper limit line.
Suffix:
<n>
.
irrelevant
<li>
Analyzing measurements (basics)
