Rohde & Schwarz FSV3000, User Manual

Page: 1100 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1100 User Manual 1178.8520.02 ─ 08
Manual operation: See "State" on page 442
See "Loudspeaker" on page 550
SYSTem:SPEaker:MAXVolume <Volume>
Defines the maximum volume to be output as a percentage of the maximum possible
volume.
Parameters:
<Volume> percentage
Example: SYST:SPE:MAXV 50
Manual operation: See "Max Volume" on page 443
SYSTem:SPEaker:MUTE
Temporarily disables the audio output via the built-in loudspeakers.
Example: SYST:SPE:MUTE
Manual operation: See "Audio Output Volume" on page 443
SYSTem:SPEaker:VOLume <Volume>
This command defines the volume of the built-in loudspeaker for demodulated signals.
This setting is maintained for all applications.
The command is available in the time domain in Spectrum mode and in Analog Modu-
lation Analysis mode.
Parameters:
<Volume> Percentage of the maximum possible volume.
Range:
0 to 1
*RST: 0.5
Example: SYST:SPE:VOL 0
Switches the loudspeaker to mute.
Manual operation: See "Audio Output Volume" on page 443
12.7.2 Defining the frequency and span
The commands required to configure the frequency and span settings in a remote envi-
ronment are described here. The tasks for manual operation are described in
Chap-
ter 6.3, "Frequency and span configuration" , on page 446.
● Defining the frequency range .............................................................................. 1101
● Configuring signal tracking .................................................................................. 1105
Setting basic measurement parameters