manualshive.com logo in svg

Rohde & Schwarz FSV3000, User Manual

Share
Download
Rohde & Schwarz FSV3000 User Manual Download Page 628

Common analysis and display functions

R&S

®

FSVA3000/ R&S

®

FSV3000

628

User Manual 1178.8520.02 ─ 08

Auto Level ← Action

Automatically optimizes the level settings according to the current measurement.

If several "Auto Level" actions are defined for the same rule or for multiple rules, only
one "Auto Level" action is performed.

Trace Export ← Action

Stores the current trace data to the specified file.

Define the path and (generic) file name. The default directory is C:\R_S\INSTR\USER.
If necessary, a consecutive number is added to the specified file name to create unique
file names. Placeholders can be inserted in square brackets to create generic file
names. The placeholders are replaced by current values at the time the data is expor-
ted.

The following placeholders are supported:

●

[Date] = 

[Year]-[Month]-[Day]

●

[Time]: =

[Hour]-[Minute]-[Second]

Browse ← Trace Export ← Action

Opens a file-selection dialog box to select the directory for exported traces.

Mode ← Trace Export ← Action

Defines whether all traces or only user-defined traces are exported (as defined in
[Trace ] > "Trace export" settings).

I/Q Export ← Action

Stores the current I/Q data to the specified file. Only available for I/Q-based applica-
tions.

Define the path and (generic) file name. The default directory is C:\R_S\INSTR\USER.
If necessary, a consecutive number is added to the specified file name to create unique
file names. Placeholders can be inserted in square brackets to create generic file
names. The placeholders are replaced by current values at the time the data is expor-
ted.

The following placeholders are supported:

●

[Date] = 

[Year]-[Month]-[Day]

●

[Time]: =

[Hour]-[Minute]-[Second]

Select "Browse" to select the directory for exported data from a file-selection dialog
box.

Event-based actions

Summary of Contents for FSV3000


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands