Rohde & Schwarz FSV3000, User Manual

Page: 1242 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1242 User Manual 1178.8520.02 ─ 08
CALCulate<n>:LIMit<li>:UPPer:STATe <State>
This command turns an upper limit line on and off.
Before you can use the command, you have to select a limit line with
CALCulate<n>:
LIMit<li>:NAME
on page 1239.
Suffix:
<n>
.
irrelevant
<li> Limit line
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Manual operation: See "Visibility" on page 567
CALCulate<n>:LIMit<li>:UPPer:THReshold <Limit>
This command defines an absolute limit for limit lines with a relative scale.
The R&S FSV/A uses the threshold for the limit check, if the limit line violates the
threshold.
Suffix:
<n>
.
irrelevant
<li> Limit line
Parameters:
<Limit> Numeric value.
The unit depends on
CALCulate<n>:LIMit<li>:UNIT
on page 1239.
*RST:
-200
Default unit: dBm
Manual operation: See "Threshold" on page 569
12.8.5.2 Managing limit lines
Useful commands for managing limit lines described in the R&S FSV/A User Manual:
●
MMEM:SEL[:ITEM]:LIN:ALL
●
MMEM:STOR:TYPE
●
MMEM:LOAD:TYPE
Analyzing measurements (basics)