manualshive.com logo in svg

Rohde & Schwarz FSV3000, User Manual

Share
Download
Rohde & Schwarz FSV3000 User Manual Download Page 745

General instrument setup

R&S

®

FSVA3000/ R&S

®

FSV3000

745

User Manual 1178.8520.02 ─ 08

Add Server ← Setup Floating License Server

Inserts a new line in the server list to configure a floating license server. Select a con-
figuration file to add the new entry to. The server must be connected to the same net-
work as the R&S

 

FSV/A software, and set up as described in the R&S®License Server

- Managing Floating Licenses - user manual (see also 

"Open License Server Manager"

on page 745). The server is automatically enabled for use by default. Any changes to
the list of servers only take effect after the R&S

 

FSV/A software and local License

Manager are restarted (see 

"Apply Changes"

 

on page 745).

Remove Server ← Setup Floating License Server

Removes the selected server from the list permanently.

Tip: To disable the server without removing it permanently, deselect the 

Enabled

checkbox.

Open License Server Manager ← Setup Floating License Server

Displays the R&S®License Server Manager window. Press [F1] or select "Help" >
"Show Help" in this window to obtain more information on managing floating licenses.

Apply Changes ← Setup Floating License Server

Stores the edited floating license server list and asks you to restart the R&S

 

FSV/A

software and local License Manager so that the changes take effect.

10.8.3

 

System messages

Access

: [Setup] > "System Configuration" > "System Messages"

The system messages generated by the R&S

 

FSV/A are displayed.

The messages are displayed in the order of their occurrence; the most recent mes-
sages are placed at the top of the list. Messages that have occurred since you last vis-
ited the system messages tab are marked with an asterisk '*'.

System configuration settings

Summary of Contents for FSV3000


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands