Rohde & Schwarz FSV3000, User Manual

Page: 1377 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1377 User Manual 1178.8520.02 ─ 08
This command is only available if a HP language is selected using
SYSTem:LANGuage
on page 1375
Parameters:
<State> ON | OFF | 1 | 0
*RST:
0
Example: SYSTem:RSW ON
Manual operation: See "Sweep Repeat" on page 812
12.13.2 Reference: GPIB commands of emulated HP models
The R&S FSV/A analyzer family supports a subset of the GPIB commands of HP mod-
els 8560E, 8561E, 8562E, 8563E, 8564E, 8565E, 8566A, 8566B, 8568A, 8568B and
8594E.
Despite the differences in system architecture and device features, the supported com-
mands have been implemented in a way to ensure a sufficiently high degree of corre-
spondence with the original.
This includes the support of syntax rules for not only newer device families (B and E
models) but for the previous A family as well.
In many cases the selection of commands supported by the R&S FSV/A is sufficient to
run an existing GPIB program without adaptation.
After the introduction, this section includes the following topics:
● Command set of models 8560E, 8561E, 8562E, 8563E, 8564E, 8565E, 8566A/B,
8568A/B, 8591E, 8594E, 71100C, 71200C, and 71209A
................................... 1377
● Special features of the syntax parsing algorithms for 8566A and 8568A models
............................................................................................................................ 1401
● Special behavior of commands ...........................................................................1402
● Model-dependent default settings .......................................................................1403
● Data output formats .............................................................................................1404
● Trace data output formats ................................................................................... 1404
● Trace data input formats ..................................................................................... 1404
● GPIB status reporting ..........................................................................................1404
12.13.2.1 Command set of models 8560E, 8561E, 8562E, 8563E, 8564E, 8565E, 8566A/B,
8568A/B, 8591E, 8594E, 71100C, 71200C, and 71209A
As with the original units, the R&S FSV/A includes the command set of the A models in
the command set of the B models.
The HP model 8591E is compatible to HP model 8594E, the HP models 71100C,
71200C, and 71209A are compatible to HP models 8566A/B.
Emulating other instruments' commands