Rohde & Schwarz FSV3000, User Manual

Page: 1254 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1254 User Manual 1178.8520.02 ─ 08
Parameters:
<Directory> String containing the path and new directory name
The path may be relative or absolute.
MMEMory:MOVE <FileName>, <FileName>
This command moves a file to another directory.
The command also renames the file if you define a new name in the target directory.
If you do not include a path for <NewFileName>, the command just renames the file.
Parameters:
<FileName> String containing the path and file name of the source file.
<FileName> String containing the path and name of the target file.
Example: MMEM:MOVE 'C:\TEST01.CFG','SETUP.CFG'
Renames TEST01.CFG in SETUP.CFG in directory C:\.
MMEMory:MSIS <Drive>
This command selects the default storage device used by all MMEMory commands.
Parameters:
<Drive> 'A:' | 'C:' | … | 'Z:'
String containing the device drive name
*RST:
n.a.
MMEMory:NAME <FileName>
This command has several purposes, depending on the context it is used in.
●
It creates a new and empty file.
●
It defines the file name for screenshots taken with
HCOPy[:IMMediate<1|2>]
.
Note that you have to route the printer output to a file.
Parameters:
<FileName> String containing the path and name of the target file.
Example: MMEM:NAME 'C:\Data\PRINT1.BMP'
Selects the file name.
Manual operation: See "Report Path" on page 672
See "Save" on page 680
MMEMory:NETWork:DISConnect <Drive>[, <State>]
This command disconnects a network drive.
Managing settings and results