manualshive.com logo in svg

Rohde & Schwarz FSV3000, User Manual

Share
Download
Rohde & Schwarz FSV3000 User Manual Download Page 744

General instrument setup

R&S

®

FSVA3000/ R&S

®

FSV3000

744

User Manual 1178.8520.02 ─ 08

Setup Floating License Server

To use floating licenses, you must set up one or more floating license servers. The
R&S

 

FSV/A checks the configured servers for available floating licenses when it starts

up. Only options for which licenses are found are available in the R&S

 

FSV/A. After

changing the floating license server configuration, you must restart both the local
License Manager service and the R&S

 

FSV/A software.

For details on the floating license concept, see 

"Using a Floating License Server"

on page 741.

For details on configuring floating license servers, see the R&S

®

License Server - Man-

aging Floating Licenses - user manual.

Indicates the currently configured floating license servers. All enabled servers are
searched for floating licenses when the R&S

 

FSV/A software starts. Note that changes

to the list of servers only take effect after the R&S

 

FSV/A software and the local

License Manager are restarted. To abort any changes, simply close the dialog box.

Enabled ← Setup Floating License Server

Only enabled servers are searched. Disable servers you do not want to remove perma-
nently, but which are currently not used.

IP / Host name ← Setup Floating License Server

IP address or host name of the server. Ask your administrator for details.

Port / RPort ← Setup Floating License Server

Port information for the server. The default port is 9443. The default RPort is 9444.

Ask your administrator for details.

Description ← Setup Floating License Server

Optional description of the configured server.

System configuration settings

Summary of Contents for FSV3000


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands