Rohde & Schwarz FSV3000, User Manual

Page: 408 / 1489

Common measurement settings
R&S
®
FSVA3000/ R&S
®
FSV3000
408 User Manual 1178.8520.02 ─ 08
External Mixer (State) ................................................................................................. 408
RF Start / RF Stop .......................................................................................................408
Handover Freq ............................................................................................................ 409
Band ............................................................................................................................409
RF Overrange ............................................................................................................. 409
Preset Band ................................................................................................................ 409
Mixer Type ...................................................................................................................409
Mixer Settings (Harmonics Configuration) .................................................................. 410
└ Range 1/Range 2 ..........................................................................................410
└ Harmonic Type ..............................................................................................410
└ Harmonic Order ............................................................................................ 410
└ Conversion Loss ........................................................................................... 410
External Mixer (State)
Activates or deactivates the external mixer for input. If activated, "ExtMix" is indicated
in the channel bar of the application, together with the used band (see
"Band"
on page 409).
Remote command:
[SENSe:]MIXer<x>[:STATe]
on page 1055
RF Start / RF Stop
Displays the start and stop frequency of the selected band (read-only).
The frequency range for the user-defined band is defined via the harmonics configura-
tion (see
"Range 1/Range 2" on page 410).
For details on available frequency ranges, see table 12-4 on page 1059 .
Remote command:
[SENSe:]MIXer<x>:FREQuency:STARt
on page 1058
[SENSe:]MIXer<x>:FREQuency:STOP
on page 1058
Data input and output