Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1281
User Manual 1178.8520.02 ─ 08
Use
HCOPy:TREPort:ITEM:HEADer:LINE<line>:TEXT
to add a value to each
item.
Use
HCOPy:TREPort:ITEM:HEADer:LINE<line>:CONTrol
to select the condition
under which each item is shown.
Parameters:
<Title>
String containing the title of the item.
The default titles are as follows:
•
Line 1: "Heading"
•
Line 2: "Meas Type"
•
Line 3: "Equipment under Test"
•
Line 4: "Manufacturer"
•
Line 5: "OP Condition"
Make sure that the title string is not too long, because strings
that are too long could mess up the layout of the report.
Example:
HCOP:TREP:ITEM:HEAD:LINE3:TITL 'Device under
Test'
Renames the third title into "Device under Test".
Manual operation:
See
HCOPy:TREPort:ITEM:HEADer:STATe
<State>
This command includes or excludes the complete set of measurement information from
the test report.
Parameters:
<State>
ON | OFF
*RST:
ON
Example:
HCOP:TREP:ITEM:HEAD:STAT ON
Includes the measurement information in the test report.
Manual operation:
See
HCOPy:TREPort:ITEM:LIST?
[<ChannelType>]
This command queries the selected information to be included in the test report for a
specific channel type.
Parameters:
<ChannelType>
Selects the channel type that you want to query the test report
configuration for.
When you omit the parameter, the command returns the configu-
ration of the currently selected channel.
Example:
HCOP:TREP:ITEM:LIST? SAN
Queries the items that are included in the test reports of the
Spectrum application.
Usage:
Query only
Managing settings and results
