Rohde & Schwarz FSV3000, User Manual

Page: 851 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
851 User Manual 1178.8520.02 ─ 08
Example: INST:SEL 'IQAnalyzer'
INST:CRE:DUPL
Duplicates the channel named 'IQAnalyzer' and creates a new
channel named 'IQAnalyzer2'.
Usage: Event
Manual operation: See "Duplicate Current Channel" on page 128
INSTrument:CREate[:NEW] <ChannelType>, <ChannelName>
This command adds a measurement channel. You can configure up to 10 measure-
ment channels at the same time (depending on available memory).
See also
●
INSTrument[:SELect]
on page 853
●
INSTrument:DELete
on page 852
Parameters:
<ChannelType> Channel type of the new channel.
For a list of available channel types, see
INSTrument:LIST?
on page 852.
<ChannelName> String containing the name of the channel.
Note that you cannot assign an existing channel name to a new
channel. If you do, an error occurs.
Example: INST:CRE SAN, 'Spectrum 2'
Adds a spectrum display named "Spectrum 2".
Manual operation: See "New Channel" on page 128
INSTrument:CREate:REPLace <ChannelName1>,<ChannelType>,<ChannelName2>
This command replaces a channel with another one.
Setting parameters:
<ChannelName1> String containing the name of the channel you want to replace.
<ChannelType> Channel type of the new channel.
For a list of available channel types, see
INSTrument:LIST?
on page 852.
<ChannelName2> String containing the name of the new channel.
Note : If the specified name for a new channel already exists, the
default name, extended by a sequential number, is used for the
new channel (see
INSTrument:LIST?
on page 852).
Channel names can have a maximum of 31 characters, and
must be compatible with the Windows conventions for file
names. In particular, they must not contain special characters
such as ":", "*", "?".
Selecting the operating mode and application