Rohde & Schwarz FSV3000, User Manual

Page: 864 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
864 User Manual 1178.8520.02 ─ 08
CPOWer
Channel power measurements.
Returns the channel power. The unit of the return values
depends on the scaling of the y-axis:
•
logarithmic scaling returns the power in the current unit
•
linear scaling returns the power in W
For SEM measurements, the return value is the channel power
of the reference range (in the specified sub block).
PPOWer
Peak power measurements.
Returns the peak power. The unit of the return values depends
on the scaling of the y-axis:
•
logarithmic scaling returns the power in the current unit
•
linear scaling returns the power in W
For SEM measurements, the return value is the peak power of
the reference range (in the specified sub block).
Note that this result is only available if the power reference type
is set to peak power (see
[SENSe:]ESPectrum<sb>:RTYPe
on page 946).
OBANdwidth | OBWidth
Occupied bandwidth.
Returns the occupied bandwidth in Hz.
COBandwidth | COBWidth
<Centroid frequency>,<Frequency offset>
See
Chapter 5.5.2, "OBW results" , on page 220
Manual operation: See "C/N" on page 216
See "C/N0" on page 217
CALCulate<n>:MARKer<m>:FUNCtion:POWer<sb>:SELect <MeasType>
This command selects a power measurement and turns the measurement on.
Suffix:
<n>
.
Window
<m> Marker
<sb> irrelevant
Parameters:
<MeasType> ACPower | MCACpower
Adjacent channel leakage ratio (ACLR), also known as adjacent
channel power or multicarrier adjacent channel.
The R&S
FSV/A performs the measurement on the trace
selected with
[SENSe:]POWer:TRACe
.
CPOWer
Channel power measurement with a single carrier.
The R&S
FSV/A performs the measurement on the trace
selected with
[SENSe:]POWer:TRACe
.
Configuring and performing measurements