Rohde & Schwarz FSV3000, User Manual

Page: 1174 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1174 User Manual 1178.8520.02 ─ 08
<m> Marker
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Example: CALC:DELT2 ON
Turns on delta marker 2.
Manual operation: See "Marker State" on page 336
See "Marker Type" on page 337
See "Select Marker" on page 338
CALCulate<n>:DELTamarker<m>:TRACe <Trace>
This command selects the trace a delta marker is positioned on.
Note that the corresponding trace must have a trace mode other than "Blank".
If necessary, the command activates the marker first.
Suffix:
<n>
.
Window
<m> Marker
Parameters:
<Trace> Trace number the marker is assigned to.
Example: CALC:DELT2:TRAC 2
Positions delta marker 2 on trace 2.
CALCulate<n>:DELTamarker<m>:X <Position>
This command moves a delta marker to a particular coordinate on the x-axis.
If necessary, the command activates the delta marker and positions a reference
marker to the peak power.
Suffix:
<n>
.
Window
<m> Marker
Parameters:
<Position> Numeric value that defines the marker position on the x-axis.
The position is relative to the reference marker.
To select an absolute position you have to change the delta
marker mode with
CALCulate<n>:DELTamarker<m>:MODE
on page 1173.
A query returns the absolute position of the delta marker.
Analyzing measurements (basics)