General instrument setup
R&S
®
FSVA3000/ R&S
®
FSV3000
762
User Manual 1178.8520.02 ─ 08
Selecting all or no coupling mechanisms
Select all items available in the general coupling manager using the "Enable All Items"
button.
Note that you cannot actually select all items, because some of them are mutually
exclusive.
Deselect all items available in the coupling manager using the "Disable All Items" but-
ton.
Remote command:
not supported
Restoring the default configuration
You can restore the default parameter coupling configuration any time with the "Default
Config" button.
Remote command:
not supported
10.10.2
User-defined parameter coupling
Access
: [SETUP] > "Parameter Coupling" > "User Coupling"
User couplings allow you to synchronize user-defined parameters, as well as markers
and lines, between measurement channels.
Compared to the predefined couplings, user couplings do not necessarily have to syn-
chronize all active measurement channels. Instead you can define specific channels
that are synchronized with each other, in any combination, while other channels remain
independent.
Example:
You currently run two instances of the Spectrum application, two instances of the VSA
application, and one instance of the AM/FM/PM Analog Demod application.
You can synchronize only the first instance of the Spectrum application with the first
instance of the VSA application, while the other three channels remain independent.
Alternatively, you can synchronize all instances of the VSA application, while the Spec-
trum and AM/FM/PM Analog Demod applications remain independent.
Synchronizing measurement channel configuration
