manualshive.com logo in svg

Rohde & Schwarz FSV3000, User Manual

Share
Download
Rohde & Schwarz FSV3000 User Manual Download Page 101

Getting started

R&S

®

FSVA3000/ R&S

®

FSV3000

101

User Manual 1178.8520.02 ─ 08

Table 3-9: Time domain display

Label

Information

CF

Center frequency

Pts

Number of sweep points or (rounded) number of currently displayed points in zoom
mode

ms/

Time per division

3.5.1.5

 

Instrument and status information

Global instrument settings and functions, the instrument status and any irregularities
are indicated in the status bar beneath the diagram.

In the MultiView tab, the status bar always displays the information for the currently
selected measurement.

The following information is displayed:

Instrument status

The instrument is configured for operation with an external reference.

Progress

The progress of the current operation is displayed in the status bar.

In the MultiView tab, the progress bar indicates the status of the currently selected
measurement, not the measurement a Sequencer is currently performing, for example.

Date and time

The date and time settings of the instrument are displayed in the status bar.

3.5.1.6

 

Error information

If errors or irregularities are detected, a keyword and an error message, if available,
are displayed in the status bar.

Depending on the type of message, the status message is indicated in varying colors.

Operating the instrument

Summary of Contents for FSV3000


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands