manualshive.com logo in svg

Rohde & Schwarz FSV3000, User Manual

Share
Download
Rohde & Schwarz FSV3000 User Manual Download Page 51

Getting started

R&S

®

FSVA3000/ R&S

®

FSV3000

51

User Manual 1178.8520.02 ─ 08

● "Display 2": external monitor only
● "Duplicate": both internal and external monitor

6. Tap "Apply" to try out the settings before they are accepted permanently, then you

can easily return to the previous settings, if necessary.

7. Select "OK" if the settings are suitable.

3.2.10

 

Windows operating system

The instrument contains the Windows

 

10 operating system which has been configured

according to the instrument's features and needs. Changes in the system setup are
only required when peripherals like a keyboard or a printer are installed or if the net-
work configuration does not comply with the default settings. After the R&S

 

FSV/A is

started, the operating system boots and the instrument firmware is started automati-
cally.

Tested software

The drivers and programs used on the instrument under Windows

 

10 are adapted to

the instrument. Only install update software released by Rohde

 

&

 

Schwarz to modify

existing instrument software.

You can install additional software on the instrument; however, additional software can
impair instrument function. Thus, run only programs that Rohde

 

&

 

Schwarz has tested

for compatibility with the instrument software.

The following program packages have been tested:

●

R&S Power Viewer Plus - virtual power meter for displaying results of the power
sensor R&S NRPxx (install only this component!)

●

Symantec Endpoint Security – virus-protection software

●

FileShredder - for reliable deletion of files on the hard disk

Service packs and updates

Microsoft regularly creates security updates and other patches to protect Windows-
based operating systems. They are released through the Microsoft Update website and
associated update server. Update instruments using Windows regularly, especially
instruments that connect to a network.

Firewall settings

A firewall protects an instrument by preventing unauthorized users from gaining access
to it through a network. Rohde

 

&

 

Schwarz highly recommends using the firewall on

your instrument. Rohde

 

&

 

Schwarz instruments are shipped with the Windows firewall

enabled. All ports and connections for remote control are enabled.

Note that changing firewall settings requires administrator rights.

Preparing for use

Summary of Contents for FSV3000


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands