Rohde & Schwarz FSV3000, User Manual

Page: 819 / 1489

Network operation and remote control
R&S
®
FSVA3000/ R&S
®
FSV3000
819 User Manual 1178.8520.02 ─ 08
SNMPv3 Configuration
For SNMPv3 authentication, you can define user profiles. You can manage them via a
table.
To add a new user, select the "Add" button and enter the data.
To delete all user profiles, select the "Delete All" button.
To delete a single user profile, select the "x" in the appropriate user line of the table.
Remote command:
Create user:
SYSTem:COMMunicate:SNMP:USM:USER
on page 1335
Query all users:
SYSTem:COMMunicate:SNMP:USM:USER:ALL?
on page 1336
Delete a single user:
SYSTem:COMMunicate:SNMP:USM:USER:DELete
on page 1336
Delete all users:
SYSTem:COMMunicate:SNMP:USM:USER:DELete:ALL
on page 1336
User Name ← SNMPv3 Configuration
Defines the name of the user who should have specific user rights.
Entering a user name is mandatory.
Access ← SNMPv3 Configuration
Defines the access right a user can have: read-write = RW, read-only = RO.
"RW"
Read-write access allows the user to read and change information.
"RO" Read-only access allows the user to only read information.
Security Level ← SNMPv3 Configuration
Defines the security level for access: noAuthNoPriv, authNoPriv or authPriv.
For security reasons, we recommend that you only allow access via passwords.
"noAuthNo-
Priv"
Low security level: no authentication, no data transfer encryption,
user name query only.
No
authentication password and no privacy password to be defined.
"authNoPriv" Medium security level: authentication, no data transfer encryption,
user name and password query.
Authentication password to be defined, privacy password is not avail-
able.
"authPriv" High security level: authentication, data transfer encryption, user
name, password and encryption password query.
Authentication password and privacy password to be defined.
If no privacy password is defined, the HUMS service uses the authen-
tication password as privacy password.
Passwords ← SNMPv3 Configuration
Depending on the selected Security Level , you have to define specific passwords:
authentication password (Auth. Password) and privacy password (Priv. Password).
Network and remote control settings