manualshive.com logo in svg

Rohde & Schwarz FSV3000, User Manual

Share
Download
Rohde & Schwarz FSV3000 User Manual Download Page 255

Measurements and results

R&S

®

FSVA3000/ R&S

®

FSV3000

255

User Manual 1178.8520.02 ─ 08

Remote command: 

[SENSe:]ESPectrum<sb>:PRESet:STORe

 

on page 928

Delete Standard

Deletes the selected standard. Standards predefined by Rohde & Schwarz can also be
deleted. A confirmation query is displayed to avoid unintentional deletion of the stan-
dard.

Note: 

Restoring predefined standard files. The standards predefined by Rohde &

Schwarz available at the time of delivery can be restored using the "Restore Standard
Files" function (see 

"Restore Standard Files"

 

on page 255).

Restore Standard Files

Restores the standards predefined by Rohde & Schwarz available at the time of deliv-
ery.

The XML files from the

C:\Program Files\Rohde-Schwarz\FSV3000\<version>\sem_backup

 folder

are copied to the

C:\Program Files\Rohde-Schwarz\FSV3000\<version>\sem_std

 folder.

Note that this function overwrites customized standards that have the same name as
predefined standards.

Remote command: 

[SENSe:]ESPectrum<sb>:PRESet:RESTore

 

on page 928

5.6.5.7

 

List evaluation (results configuration)

Access

: "Overview" > "Select Measurement" > "Spectrum Emission Mask" > "List

Evaluation"

In the "List Evaluation" dialog box, you configure the contents and display of the SEM
results.

Spectrum emission mask (SEM) measurement

Summary of Contents for FSV3000


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands