Rohde & Schwarz FSV3000, User Manual

Page: 623 / 1489

Common analysis and display functions
R&S
®
FSVA3000/ R&S
®
FSV3000
623 User Manual 1178.8520.02 ─ 08
Actions
Specified actions to be performed by the rule.
Triggered
Number of trigger events for the rule that occurred since the last instrument preset or
restart.
New Rule
Opens the "Event Based Actions: Modify Rule" dialog box to define a new rule as
described in
Chapter 7.7.2, "Defining rules" , on page 623.
Edit Rule
Opens the "Event Based Actions: Modify Rule" dialog box to edit the selected rule as
described in
Chapter 7.7.2, "Defining rules" , on page 623.
Copy Rule
Creates a copy of the selected rule and opens the "Event Based Actions: Modify Rule"
dialog box to edit it, as described in
Chapter 7.7.2, "Defining rules" , on page 623.
Delete Rule
Deletes the selected event-based action rule.
Show Journal
Shows the logging information for the rules defined in the EBA rule manager. This
information is useful to debug rules when expected actions are not performed. For
details, see
Chapter 7.7.3, "Debugging rules with the EBA-Journal" , on page 629.
7.7.2 Defining rules
Access : "Event-based actions" > "New Rule" / "Edit Rule" / "Copy Rule"
Rules are defined individually for each measurement channel. You must activate each
rule for each application individually, and only the currently active channel processes
the rules.
A maximum of 5 rules can be defined for each application. The base unit applications
(Spectrum, I/Q analyzer, Analog Demodulation) are counted together and thus support
a total of 5 rules over all three applications. Rules defined in one application are visible,
but cannot be edited or enabled, in the other two applications. The same applies to dif-
ferent measurements within a single application (e.g. SEM and ACLR).
Event-based actions