Rohde & Schwarz FSV3000, User Manual

Page: 951 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
951 User Manual 1178.8520.02 ─ 08
Parameters:
<Level> Range: -199.9 dBm to 200 dBm
Default unit: dBm
Example: CALC:LIM:ESP:PCL1:MAX -40 dBm
Sets the maximum power value of the first power class to -40
dBm.
Manual operation: See "PMin/ PMax" on page 250
CALCulate<n>:LIMit<li>:ESPectrum<sb>:PCLass<pc>:MINimum <Level>
This command defines the lower limit of a particular power class.
Note:
●
The first power class always has a lower limit of -200 dBm.
●
The lower limit of a power class must always be the same as the upper limit of the
previous power class.
●
The power class must already exist (see
CALCulate<n>:LIMit<li>:
ESPectrum<sb>:PCLass<pc>:COUNt
on page 949).
Suffix:
<n>
.
irrelevant
<li> irrelevant
<sb> 1 to 8
<pc> 1..n
power class
Parameters:
<Level> Range: -200 dBm to 199.9 dBm
Default unit: dBm
Example: CALC:LIM:ESP:PCL2:MIN -40 dBm
Sets the minimum power value of the second power class to -40
dBm.
Manual operation: See "PMin/ PMax" on page 250
12.5.6.7 Configuring MSR SEM measurements
The following commands configure MSR SEM measurements. For details see Chap-
ter 5.6.4.4, "Multi-standard radio (MSR) SEM measurements" , on page 235.
For manual operation see Chapter 5.6.5.5, "MSR settings" , on page 250.
[SENSe:]ESPectrum<sb>:MSR:APPLy
.............................................................................952
[SENSe:]ESPectrum<sb>:MSR:BAND
............................................................................. 952
[SENSe:]ESPectrum<sb>:MSR:BCATegory
...................................................................... 953
[SENSe:]ESPectrum<sb>:MSR:CLASs
............................................................................ 954
[SENSe:]ESPectrum<sb>:MSR:GSM:CARRier
................................................................. 954
[SENSe:]ESPectrum<sb>:MSR:GSM:CPResent
............................................................... 955
Configuring and performing measurements