manualshive.com logo in svg

Rohde & Schwarz FSV3000, User Manual

Share
Download
Rohde & Schwarz FSV3000 User Manual Download Page 839

Network operation and remote control

R&S

®

FSVA3000/ R&S

®

FSV3000

839

User Manual 1178.8520.02 ─ 08

Windows will then map drives of the controller to the corresponding network drives.

9. To use printers connected to the controller while accessing them from the

R&S

 

FSV/A, activate the "Printers" option. Do not change the remaining settings.

10. Open the "Display" tab.

The options for configuring the R&S

 

FSV/A screen display are displayed.

11. Under "Remote desktop size", you can set the size of the R&S

 

FSV/A window on

the desktop of the controller.

12. Under "Colors", do not change the settings.

13. Set the "Display the connection bar when I use the full screen" option:

How to set up a network and remote control

Summary of Contents for FSV3000


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands