Rohde & Schwarz FSV3000, User Manual

Page: 940 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
940 User Manual 1178.8520.02 ─ 08
Parameters:
<Level> Relative limit at the stop frequency of a SEM range.
Range:
-400 to 400
*RST: -50
Default unit: dBc
Example: SENSe:ESPectrum:RANGe:LIMit:RELative:STOP -15
For a detailed example see Chapter 12.5.6.11, "Example: SEM
measurement" , on page 959.
Manual operation: See "Rel Limit Start / Stop <n>" on page 244
[SENSe:]ESPectrum<sb>:RANGe<ri>:LIMit<li>:RELative:STOP:ABS <Level>
This command defines an absolute limit for the MAX function of the relative limit for a
SEM range.
For more information see "Relative limit line functions" on page 233.
Suffix:
<sb>
.
1 to 8
<ri> 1..n
Selects the SEM range.
<li> 1..n
Power class for which the limit is defined.
Parameters:
<Level> Absolute limit at the stop frequency of a SEM range to be used
in addition to the relative limit if the MAX function is enabled (see
[SENSe:]ESPectrum<sb>:RANGe<ri>:LIMit<li>:
RELative:STOP:FUNCtion
on page 940).
Range: -400 to 400
*RST: -13
Default unit: dBm
Example: SENSe:ESPectrum:RANGe:LIMit:RELative:STOP:
ABSolute -15
For a detailed example see Chapter 12.5.6.11, "Example: SEM
measurement" , on page 959.
Manual operation: See "Rel Limit Start / Stop <n>" on page 244
[SENSe:]ESPectrum<sb>:RANGe<ri>:LIMit<li>:RELative:STOP:FUNCtion
<Function>
This command enables the use of a function when defining the relative limit for a SEM
range.
Suffix:
<sb>
.
1 to 8
Configuring and performing measurements