Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1357
User Manual 1178.8520.02 ─ 08
<Name>
To synchronize a specific window (only possible in the Analog
Demodulation application).
'All Windows'
To synchronize all measurement windows.
<Parameter>
String containing the name of a synchronizable parameter.
<ChannelName>
String containing the name of a measurement channel or chan-
nel type.
The second channel name is only necessary for synchronization
between two specific channels. If you synchronize all channels
of the same type or all channels, the string has to be empty.
<Window>
String containing the name of a measurement window.
The second window name is only necessary for synchronization
between two specific channels. If you synchronize all channels
of the same type or all channels, the string has to be empty.
<Parameter>
String containing the name of a synchronizable parameter.
The second parameter name is only necessary for synchroniza-
tion between two specific channels. If you synchronize all chan-
nels of the same type or all channels, the string has to be empty.
<arg6>
LTOR | RTOL | BIDir
Selects the direction in which synchronization works.
BIDir
Changes of a parameter are applied both ways (from channel 1
to channel 2 and vice versa).
LTOR
Changes of a parameter are applied from channel 1 to channel
2, but not the other way around.
RTOL
Changes of a parameter are applied from channel 2 to channel
1, but not the other way around.
<State>
ON | OFF | 0 | 1
Enables or disables the coupling
OFF | 0
Switches the coupling off
ON | 1
Switches the coupling on
*RST:
1
Example:
INST:COUP:USER3 'Spectrum1','All
Windows','Attenuation','Spectrum 2','All
Windows','Attenuation',BID,ON
Synchronizes the attenuation between the channels named
'Spectrum1' and 'Spectrum 2' in both directions and turns on the
coupling.
Manual operation:
See
Configuring the R&S
FSV/A
