Rohde & Schwarz FSV3000, User Manual

Page: 1167 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1167 User Manual 1178.8520.02 ─ 08
<FileName> String containing the path and name of the import file.
MMEMory:STORe<n>:TRACe <Trace>, <FileName>
This command exports trace data from the specified window to an ASCII file.
For details on the file format, see Chapter 7.6.6, "Reference: ASCII file export format" ,
on page 621.
Secure User Mode
In secure user mode, settings that are stored on the instrument are stored to volatile
memory, which is restricted to 256
MB. Thus, a "memory limit reached" error can occur
although the hard disk indicates that storage space is still available.
To store data permanently, select an external storage location such as a USB memory
device.
For details, see Chapter 3.2.15, "Protecting data using the secure user mode" ,
on page 55.
Suffix:
<n>
.
Window
Parameters:
<Trace> Number of the trace to be stored
(This parameter is ignored if the option "Export all Traces and all
Table Results" is activated in the Export configuration settings,
see
FORMat:DEXPort:TRACes
on page 1165).
<FileName> String containing the path and name of the target file.
Example: MMEM:STOR1:TRAC 1,'C:\TEST.ASC'
Stores trace 1 from window 1 in the file
TEST.ASC
.
Manual operation: See "Export Trace to ASCII File" on page 616
12.8.2.7 Programming example: configuring a spectrogram
This example demonstrates how to configure a spectrogram for a basic frequency
sweep in a remote environment. The spectrogram is displayed in addition to the spec-
trum display, in a new window. In addition, the usage of special spectrogram markers is
demonstrated (see
Chapter 12.8.3.6, "Marker search (spectrograms)" , on page 1191).
Basic trace settings are demonstrated in the Chapter 12.15.1, "Programming example:
performing a basic frequency sweep" , on page 1415.
//-----------Preparing the Measurement ------------
*RST
//Resets the instrument
LAY:ADD? '1',BEL,SGR
//Displays a new window below window 1 and activates spectrogram display.
//The new window name is returned as a result: '2'.
Analyzing measurements (basics)