manualshive.com logo in svg

Rohde & Schwarz FSV3000, User Manual

Share
Download
Rohde & Schwarz FSV3000 User Manual Download Page 124

Applications, measurement channels

R&S

®

FSVA3000/ R&S

®

FSV3000

124

User Manual 1178.8520.02 ─ 08

Remote command: 

INST:SEL AMPL

, see 

INSTrument[:SELect]

 

on page 853

AM/FM/PM Modulation Analysis

The AM/FM/PM Modulation Analysis application requires an instrument equipped with
the corresponding optional software. This application provides measurement functions
for demodulating AM, FM, or PM signals.

For details see the R&S

 

FSV3-K7 User Manual.

Remote command: 

INST:SEL ADEM

, see 

INSTrument[:SELect]

 

on page 853

GSM

The GSM application requires an instrument equipped with the GSM Measurements
option R&S

 

FSV3-K10. This application provides GSM measurements.

For details see the R&S

 

FSV3-K10 User Manual.

Remote command: 

INST:SEL GSM

, see 

INSTrument[:SELect]

 

on page 853

I/Q Analyzer

The I/Q Analyzer application provides measurement and display functions for I/Q data.

For details see the R&S

 

FSV3 I/Q Analyzer User Manual.

Remote command: 

INST:SEL IQ

, see 

INSTrument[:SELect]

 

on page 853

LTE

The LTE application requires an instrument equipped with one of the LTE Measure-
ments options R&S

 

FSV3-K10x. These applications provide LTE measurements.

For details see the user manuals for the LTE downlink and uplink measurement appli-
cation.

Remote command: 

INST:SEL LTE

, see 

INSTrument[:SELect]

 

on page 853

NB-IoT

The NB-IoT application requires an instrument equipped with the NB-IoT measure-
ments option R&S

 

FSV3-K106. This application provides NB-IoT measurements in the

downlink.

For details see the R&S

 

FSV3-K106 (NB-IoT Downlink) User Manual.

Remote command: 

INST:SEL NIOT

, see 

INSTrument[:SELect]

 

on page 853

Noise Figure

The Noise Figure application requires an instrument equipped with the Noise Figure
Measurements option R&S

 

FSV3-K30. This application provides noise figure measure-

ments.

For details see the R&S

 

FSV3-K30 User Manual.

Available applications

Summary of Contents for FSV3000


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands