Rohde & Schwarz FSV3000, User Manual

Page: 67 / 1489

Getting started
R&S
®
FSVA3000/ R&S
®
FSV3000
67 User Manual 1178.8520.02 ─ 08
9 = IEEE 488/ IEC625/ SCPI (GPIB) interface (requires option R&S FSV3-B5)
10 = Noise Source Control (requires option R&S FSV3-B28V)
11 = Trigger 2 (In/Out) connector
12 = REF In/Out connectors
13 = IF output connector (requires option R&S
FSV3-B5)
14 = Video output connector (requires option R&S FSV3-B5)
15 = Trigger 3 (output) connector (requires option R&S FSV3-B5)
16 = Aux. Control connector (requires option R&S FSV3-B5)
17 = Aux. Port (requires option R&S FSV3-B5)
18 = Device ID with serial number and other labels
The meanings of the labels on the R&S FSV/A are described in Chapter 3.3.2.15,
"Labels on R&S FSV/A" , on page 70.
3.3.2.1 AC power supply connection and main power switch
An AC power supply connector and main power switch are located in a unit on the rear
panel of the instrument.
Main power switch function:
Position 1: The instrument can be started via the Power key on the front panel.
The (optional) OCXO reference frequency is warmed up.
Position O: The entire instrument is disconnected from the AC power supply.
For details, refer to "Connecting to power" on page 34 and Chapter 3.2.5, "Connecting
the AC power" , on page 46.
3.3.2.2 HDMI display port
You can connect an external monitor or other display device to the HDMI connector on
the R&S
FSV/A to provide an enlarged display.
For details, see Chapter 3.2.9, "Connecting an external monitor" , on page 49.
3.3.2.3 LAN
The R&S FSV/A is equipped with a 1 GBit Ethernet IEEE 802.3u network interface with
Auto-MDI(X) functionality. The assignment of the RJ-45 connector supports twisted-
pair category 5 UTP/STP cables in a star configuration (UTP stands for
unshielded
twisted pair , and STP for shielded twisted pair ).
A second LAN 10GBase-T connector is provided for remote control or fast I/Q data
transfer.
For details, see Chapter 11, "Network operation and remote control" , on page 773.
Instrument tour