Common analysis and display functions
R&S
®
FSVA3000/ R&S
®
FSV3000
619
User Manual 1178.8520.02 ─ 08
Alternatively, you can import a single trace only, which is displayed for the trace num-
ber specified in "Import to Trace". This list contains all currently active traces in the
result display. If a trace with the specified number exists in the import file, that trace is
imported. Otherwise, the first trace in the file is imported (indicated by a message in
the status bar).
Remote command:
Import ASCII File to Trace ← Importing Traces
Loads one trace or all traces from the selected file in the selected ASCII format (
.DAT
or
.CSV
) to the currently active result display.
Remote command:
File Explorer ← Import ASCII File to Trace ← Importing Traces
Opens the Microsoft Windows File Explorer.
Remote command:
not supported
7.6.3
How to import traces
Trace data that was stored during a previous measurement can be imported to the
Spectrum application, for example as a reference trace.
To import trace data
1. Press the [Trace] key.
2. Select "Trace Config" > "Trace / Data Export"/"Import".
3. Select "Import All Traces" to import traces for all the currently active traces, or
select a specific trace to be imported in "Import to Trace".
4. Select "Import ASCII File to Trace".
5. Select the file format in which the data is stored.
6. Select the file that contains the trace data.
7. Select "Select" to close the dialog box and start the import.
7.6.4
How to export trace data and numerical results
The measured trace data and numerical measurement results in tables can be expor-
ted to an ASCII file. For each sweep point, the measured trace position and value are
output.
The file is stored with a
.DAT
or
.CSV
extension. For details on the storage format, see
Chapter 7.6.6, "Reference: ASCII file export format"
Importing and exporting measurement results for evaluation
