manualshive.com logo in svg

Rohde & Schwarz FSV3000, User Manual

Share
Download
Rohde & Schwarz FSV3000 User Manual Download Page 1065

Remote commands

R&S

®

FSVA3000/ R&S

®

FSV3000

1065

User Manual 1178.8520.02 ─ 08

This command is only available with option B21 (External Mixer) installed.

Parameters:

<BiasSetting>

*RST: 

0.0 A

Default unit: A

Example: 

CORR:CVL:SEL 'LOSS_TAB_4'

Selects the conversion loss table.

CORR:CVL:BIAS 3A

Manual operation: 

See 

"Write to CVL table"

 

on page 413

See 

"Bias"

 

on page 416

[SENSe:]CORRection:CVL:CATalog?

This command queries all available conversion loss tables saved in the

C:\R_S\INSTR\USER\cvl\

 directory on the instrument.

This command is only available with option B21 (External Mixer) installed.

Return values: 

<Files>

'string'
Comma-separated list of strings containing the file names.

Example: 

CORR:CVL:CAT?

Usage: 

Query only

[SENSe:]CORRection:CVL:CLEar

This command deletes the selected conversion loss table. Before this command can
be performed, the conversion loss table must be selected (see 

[SENSe:

]CORRection:CVL:SELect

 

on page 1067).

This command is only available with option B21 (External Mixer) installed.

Example: 

CORR:CVL:SEL 'LOSS_TAB_4'

Selects the conversion loss table.

CORR:CVL:CLE

Manual operation: 

See 

"Delete Table"

 

on page 414

[SENSe:]CORRection:CVL:COMMent 

<Text>

This command defines a comment for the conversion loss table. Before this command
can be performed, the conversion loss table must be selected (see 

[SENSe:

]CORRection:CVL:SELect

 

on page 1067).

This command is only available with option B21 (External Mixer) installed.

Parameters:

<Text>

Setting basic measurement parameters

Summary of Contents for FSV3000


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands