Rohde & Schwarz FSV3000, User Manual

Page: 865 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
865 User Manual 1178.8520.02 ─ 08
OBANdwidth | OBWidth
Occupied bandwidth measurement.
The R&S
FSV/A performs the measurement on the trace that
marker 1 is positioned on.
Manual operation: See "C/N" on page 216
See "C/N0" on page 217
CALCulate<n>:MARKer<m>:FUNCtion:POWer<sb>[:STATe] <State>
This command turns a power measurement on and off.
Suffix:
<n>
.
irrelevant
<m> irrelevant
<sb> irrelevant
Parameters:
<State> ON | OFF | 1 | 0
ON | 1
The power measurement selected with
CALCulate<n>:
MARKer<m>:FUNCtion:POWer<sb>:SELect
is activated.
OFF | 0
A standard frequency sweep is activated.
*RST:
0
Manual operation: See "C/N" on page 216
See "C/N0" on page 217
[SENSe:]POWer:ACHannel:PRESet <Measurement>
This command determines the ideal span, bandwidths and detector for the current
power measurement.
To get a valid result, you have to perform a complete measurement with synchroniza-
tion to the end of the measurement before reading out the result. This is only possible
for single sweep mode.
See also
INITiate<n>:CONTinuous
on page 860.
Parameters:
<Measurement> ACPower | MCACpower
ACLR measurement
CPOWer
channel power measurement
OBANdwidth | OBWidth
Occupied bandwidth measurement
Manual operation: See "Optimized Settings (Adjust Settings)" on page 178
See "Adjust Settings" on page 217
See "Adjust Settings" on page 222
Configuring and performing measurements