manualshive.com logo in svg

Rohde & Schwarz FSV3000, User Manual

Share
Download
Rohde & Schwarz FSV3000 User Manual Download Page 125

Applications, measurement channels

R&S

®

FSVA3000/ R&S

®

FSV3000

125

User Manual 1178.8520.02 ─ 08

Remote command: 

INST:SEL NOISE

, see 

INSTrument[:SELect]

 

on page 853

Phase Noise

The Phase Noise application requires an instrument equipped with the Phase Noise
Measurements option, R&S

 

FSV3-K40. This application provides measurements for

phase noise tests.

For details see the R&S

 

FSV3-K40 User Manual.

Remote command: 

INST:SEL PNOISE

, see 

INSTrument[:SELect]

 

on page 853

Pulse Measurements

The Pulse application requires an instrument equipped with the Pulse Measurements
option, R&S

 

FSV3-K6. This application provides measurement functions for pulsed sig-

nals.

For details see the R&S

 

FSV3-K6 User Manual.

Remote command: 

INST:SEL PULSE

, see 

INSTrument[:SELect]

 

on page 853

Transient Analysis

The Transient Analysis application requires an instrument equipped with the Transient
Analysis option, R&S

 

FSV3-K60. This application provides measurements and evalua-

tions for Transient Analysis.

For details see the R&S

 

FSV3-K60 User Manual.

Remote command: 

INST:SEL TA

, see 

INSTrument[:SELect]

 

on page 853

Vector Signal Analysis (VSA)

The VSA application requires an instrument equipped with the Vector Signal Analysis
option, R&S

 

FSV3-K70. This application provides measurements and evaluations for

single-carrier digitally modulated signals.

For details see the R&S

 

FSV3-K70 User Manual.

Remote command: 

INST:SEL DDEM

, see 

INSTrument[:SELect]

 

on page 853

WLAN

The WLAN application requires an instrument equipped with the WLAN option,
R&S

 

FSV3-K91/91n. This application provides measurements and evaluations accord-

ing to the WLAN IEEE 802.11 standards.

For details see the R&S

 

FSV3-K91 User Manual.

Remote command: 

INST:SEL WLAN

, see 

INSTrument[:SELect]

 

on page 853

Available applications

Summary of Contents for FSV3000


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands