manualshive.com logo in svg

Rohde & Schwarz FSV3000, User Manual

Share
Download
Rohde & Schwarz FSV3000 User Manual Download Page 627

Common analysis and display functions

R&S

®

FSVA3000/ R&S

®

FSV3000

627

User Manual 1178.8520.02 ─ 08

Action

Defines the actions to be taken when the specified events occur.

Depending on the selected action, further settings are available.

Store Screenshot ← Action

Creates and stores a screenshot of the current display to a file.

Storage location (Browse) ← Store Screenshot ← Action

Defines the storage location of the screenshots. Enter the path of the target directory
directly, or browse in the file explorer and select the directory there.

File name ← Store Screenshot ← Action

Defines the (generic) file name for the screenshots. If necessary, a consecutive num-
ber is added to the specified file name to create unique file names. Placeholders can
be inserted in square brackets to create generic file names. The placeholders are
replaced by current values at the time the screenshot is created.

The following placeholders are supported:

●

[Year]

●

[Month]

●

[Day]

●

[Hour]

●

[Minute]

●

[Second]

●

[Date] = 

[Year]-[Month]-[Day]

●

[Time]: =

[Hour]-[Minute]-[Second]

Example: 

The definition 

ScreenShot_[Date]_[Time]

 creates file names such as

ScreenShot_2018-12-14_12-49-51.PNG

,

ScreenShot_2018-12-14_12-50-01.PNG

.

Format ← Store Screenshot ← Action

Defines the image file format

Stop Cont Sweep ← Action

Stops a continuous sweep.

No further parameters required.

Deactivate Rule ← Action

Deactivates the rule after the specified number of trigger events occurred; useful to
perform a single action only.

Event-based actions

Summary of Contents for FSV3000


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands