manualshive.com logo in svg

Rohde & Schwarz FSV3000, User Manual

Share
Download
Rohde & Schwarz FSV3000 User Manual Download Page 513

Common analysis and display functions

R&S

®

FSVA3000/ R&S

®

FSV3000

513

User Manual 1178.8520.02 ─ 08

Remote command: 
Single zoom:

DISPlay[:WINDow<n>][:SUBWindow<w>]:ZOOM[:STATe]

 

on page 1141

Multiple zoom:

DISPlay[:WINDow<n>][:SUBWindow<w>]:ZOOM:MULTiple<zn>[:STATe]

on page 1143 (for each multiple zoom window)

 Data shift (Pan)

Shifts the data to be evaluated in the result display (analysis region or hop/chirp) and
re-evaluates the new data. 

ALL

 result displays based on the same data (analysis

region or hop/chirp) are updated.

Currently, this function is only available in the Transient Analysis application.

Tip:

 Result tables are also re-evaluated for each data shift, which can take some time.

Close the result tables during a data shift/zoom to improve the screen update speed.

Data Zoom

Decreases the amount of data to be evaluated in the result display (analysis region or
hop/chirp) and re-evaluates the new data, thus enlarging the display of the remaining
data.

ALL

 result displays based on the same data (analysis region or hop/chirp) are updated.

Currently, this function is only available in the Transient Analysis application.

Tip:

 result tables are also re-evaluated for each data zoom, which can take some time.

Close the result tables during a data shift/zoom to improve the screen update speed.

7.2.3

 

How to zoom into a diagram

The remote commands required to zoom into a display are described in 

Chap-

ter 12.8.1, "Zooming into the display"

, 

on page 1140.

The following tasks are described here:

●

"To zoom into the diagram at one position"

 

on page 513

●

"To return to original display"

 

on page 514

●

"To zoom into multiple positions in the diagram"

 

on page 514

●

"To maintain a zoomed display permanently"

 

on page 515

For information on how to zoom into a diagram using touch gestures and change the
display permanently, see 

Chapter 3.5.4, "Touchscreen gestures"

, 

on page 110.

To zoom into the diagram at one position

1.

Click on the "Single Zoom" icon in the toolbar.

Zoom mode is activated.

Zoomed displays

Summary of Contents for FSV3000


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands