Rohde & Schwarz FSV3000, User Manual

Page: 383 / 1489

Common measurement settings
R&S
®
FSVA3000/ R&S
®
FSV3000
383 User Manual 1178.8520.02 ─ 08
Using the TTL interface allows for considerably higher measurement rates, because
the frequency stepping of the R&S
FSV/A is directly coupled with the frequency step-
ping of the generator.
For more information on TTL synchronization, see "TTL synchronization" on page 379.
For an overview of which generators support TTL synchronization see "Overview of
supported generators" on page 374.
TCPIP Address / Computer Name
TCP/IP address of the signal generator
Remote command:
SYSTem:COMMunicate:TCPip:RDEVice:GENerator<gen>:ADDRess
on page 1081
Reference
Selects the internal R&S FSV/A or an external frequency reference to synchronize the
R&S FSV/A with the generator (default: internal).
Remote command:
SOURce<si>:EXTernal<gen>:ROSCillator[:SOURce]
on page 1080
Edit Generator Setup File
Displays the setup file for the currently selected Generator Type in read-only mode in
an editor.
Although the existing setup files are displayed in read-only mode in the editor, they can
be saved under a different name (using "File > SaveAs").
Be careful, however, to adhere to the required syntax and commands. Errors are only
detected and displayed when you try to use the new generator (see also
"Displayed
information and errors" on page 380).
For details, see "Generator setup files" on page 375.
Frequency Min/ Frequency Max
For reference only: Lower and upper frequency limit for the generator.
Level Min/ Level Max
For reference only: Lower and upper power limit for the generator.
Measurement settings
Access : [INPUT/OUPUT] > "External Generator Config" > "Measurement Configura-
tion" tab
Data input and output