manualshive.com logo in svg

Rohde & Schwarz FSV3000, User Manual

Share
Download
Rohde & Schwarz FSV3000 User Manual Download Page 836

Network operation and remote control

R&S

®

FSVA3000/ R&S

®

FSV3000

836

User Manual 1178.8520.02 ─ 08

11.7.7

 

How to set up remote desktop

Remote Desktop is a Windows application which can be used to access and control
the instrument from a remote computer through a LAN connection. While the instru-
ment is in operation, the instrument screen contents are displayed on the remote com-
puter, and Remote Desktop provides access to all of the applications, files, and net-
work resources of the instrument. Thus, remote operation of the R&S

 

FSV/A is possi-

ble.

With Windows

 

10, Remote Desktop Client is part of the operating system. For other

versions of Windows, Microsoft offers the Remote Desktop Client as an add-on. For
details refer to the Windows

 

10 operating system documentation.

With the factory settings, the default "instrument" user can connect to the R&S

 

FSV/A

with the Remote Desktop program of the controller immediately. No further configura-
tion is required. However, if the connection fails or other users need to connect, this
section provides basic instructions on setting up the Remote Desktop for the
R&S

 

FSV/A.

11.7.7.1

 

How to configure the R&S

 

FSV/A for remote operation via remote desktop

1. Create a fixed IP address for the TCP/IP protocol as described in 

Chapter 11.7.1.2,

"How to assign the IP address"

, 

on page 825.

Note: 

To avoid problems, use a fixed IP address.

When a DHCP server is used, a new IP address is assigned each time the instru-
ment is restarted. This address must first be determined on the instrument itself.
Thus, using a DHCP server is not suitable for remote operation of the R&S

 

FSV/A

via Remote Desktop.

2.

Select the "Windows" icon in the toolbar to access the operating system.

3. In the Windows "Start" menu, select "Settings > System".

4. Search for "remote access".

5. Select "Allow remote access to your computer".

6. Define which users are to be given access to the R&S

 

FSV/A via Remote Desktop.

Note

: The user account under which configuration is carried out is automatically

enabled for Remote Desktop.

How to set up a network and remote control

Summary of Contents for FSV3000


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands