Data management
R&S
®
FSVA3000/ R&S
®
FSV3000
675
User Manual 1178.8520.02 ─ 08
9.6.1.3
Measurement information
Access
:
> "Report" > "Report menu" > "Templates" > "General" > "
▽
" > "Measure-
ment Information"
The "Measurement Information" area allows you to add user-defined information on the
measurement to the report.
You can add up to six lines to the report, plus one picture, for example a company logo.
The first line is a heading. Each of the following five lines consists of a title and a value,
which is displayed next to the title. The information can be global, that is: valid for the
entire report, or specific to an individual measurement. In this case, you define the
actual value when you store the measurement data.
Figure 9-4: Example for measurement-specific information in a test report
Working with test reports
