manualshive.com logo in svg

Rohde & Schwarz FSV3000, User Manual

Share
Download
Rohde & Schwarz FSV3000 User Manual Download Page 1342

Remote commands

R&S

®

FSVA3000/ R&S

®

FSV3000

1342

User Manual 1178.8520.02 ─ 08

SYSTem:ERRor:EXTended? 

<MessageType>[, <ChannelName>]

This command queries all system messages, or all messages of a defined type, dis-
played in the status bar for a specific channel (application).

Note:

 This command queries the strings displayed for manual operation. For remote

programs, do not define processing steps depending on these results. Instead, query
the results of the 

STATus:QUEStionable:EXTended:INFO

 status register, which

indicates whether messages of a certain type have occurred (see 

Chapter 11.2.2.8,

"STATus:QUEStionable:EXTended:INFO register"

, 

on page 785).

Parameters:

<MessageType>

ALL | INFO | WARNing | FATal | ERRor | MESSage

<ChannelName>

String containing the name of the channel.
The parameter is optional. If you omit it, the command works for
the currently active channel.

Return values: 

<Messages>

String containing all messages of the selected type for the speci-
fied channel. Each message is separated by a comma and
inserted in parentheses. If no messages are available, empty
parentheses are returned.

Example: 

SYST:ERR:EXT? ALL

Returns all messages for the currently active application, e.g.

"Message 1","Message 2"

.

Example: 

SYST:ERR:EXT? FAT,'Spectrum2'

Queries fatal errors in the 'Spectrum2' application. If none have
occurred, the result is: 

" 

 

"

.

Usage: 

Query only

SYSTem:ERRor:LIST? 

[<MessType>]

This command queries the error messages that occur during R&S

 

FSV/A operation.

Query parameters: 

<MessType>

SMSG | REMote

SMSG

(default) Queries the system messages which occurred during
manual operation.

REMote

Queries the error messages that occurred during remote opera-
tion.
Note: The remote error list is automatically cleared when the
R&S

 

FSV/A is shut down.

Return values: 

<SystemMessages> String containing all messages in the "System Messages" table.

<RemoteErrors>

<Error_no> | <Description> | <Command> | <Date> | <Time>

Configuring the R&S

 

FSV/A

Summary of Contents for FSV3000


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands