Rohde & Schwarz FSV3000, User Manual

Page: 911 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
911 User Manual 1178.8520.02 ─ 08
Parameters:
<Spacing> Default unit: HZ
Parameters for setting and query:
<SBGaps> AB | BC | CD | DE | EF | FG | GH
Name of the gap, defined by the letters of the surrounding sub
blocks (e.g. "AB" for the gap between sub blocks A and B).
Example: POW:ACH:SPAC:GAP:MAN:UPP AB,5MHz
Example: See "Example: configuring and performing an asymmetrical
MSR ACLR measurement" on page 920
Manual operation: See "Gap Channel Spacing" on page 196
MSR channel names
The functions for manual operation are described in Chapter 5.3.5.5, "MSR channel
names" , on page 198.
[SENSe:]POWer:ACHannel:NAME:GAP<gap>
..................................................................911
[SENSe:]POWer:ACHannel:NAME:UACHannel
.................................................................911
[SENSe:]POWer:ACHannel:NAME:UALTernate<ch>
..........................................................911
[SENSe:]POWer:ACHannel:SBLock<sb>:NAME[:CHANnel<ch>]
........................................912
[SENSe:]POWer:ACHannel:NAME:GAP<gap> <Name>
This command queries the name of the GAP channel.
Suffix:
<gap>
.
1 | 2
Gap (CACLR) channel number
Parameters:
<Name> String containing the name of the channel
*RST:
'Gap1', 'Gap2'
[SENSe:]POWer:ACHannel:NAME:UACHannel <Name>
This command defines the name for the upper adjacent channel in asymmetrical MSR
channel definitions. To define the name for the lower adjacent channel use the
[SENSe:]POWer:ACHannel:NAME:ACHannel
command.
Parameters:
<Name> String containing the name of the channel
*RST:
ADJ
[SENSe:]POWer:ACHannel:NAME:UALTernate<ch> <Name>
This command defines the name for the specified upper alternate channel in asymmet-
rical MSR channel definitions. To define the name for the lower adjacent channels use
the
[SENSe:]POWer:ACHannel:NAME:ALTernate<ch>
command.
Configuring and performing measurements