Rohde & Schwarz FSV3000, User Manual

Page: 818 / 1489

Network operation and remote control
R&S
®
FSVA3000/ R&S
®
FSV3000
818 User Manual 1178.8520.02 ─ 08
└ Access .......................................................................................................... 819
└ Security Level ............................................................................................... 819
└ Passwords .................................................................................................... 819
SNMP Location ........................................................................................................... 820
SNMP Contact ............................................................................................................ 820
SNMP
Selects the SNMP version to communicate with the service.
"None" Do not use SNMP.
"v2c"
Select SNMP version v2c, which also activates v1.
Unlocks the
settings available for SNMP v2c.
"v3" Select SNMP version v3.
Unlocks the
settings available for SNMP v3.
"v2c + v3" Select both SNMP versions v2c and v3.
Unlocks the settings for both SNMP v2c and v3.
Remote command:
SYSTem:COMMunicate:SNMP:VERSion
on page 1336
REST
Turns communication via REST API on or off.
Remote command:
SYSTem:COMMunicate:REST:ENABle
on page 1333
SNMPv2c Configuration
For SNMPv2c/v1 authentication, you can define the "Access" and "Community".
Access ← SNMPv2c Configuration
Defines the access an SNMP user can have for a specific SNMP community: read-
write = RW, read-only = RO.
"RW" Read-write access allows the user to read and change information.
By default, the user has read-write access rights.
"RO" Read-only access allows the user to only read information.
Remote command:
SYSTem:COMMunicate:SNMP:COMMunity:RO
on page 1334
SYSTem:COMMunicate:SNMP:COMMunity:RW
on page 1334
Community ← SNMPv2c Configuration
Defines the SNMP community string. An SNMP community represents a collection of
devices and agents grouped to monitor them. Authorized managers and the managed
devices belong to an SNMP community.
You can define an individual community for each read-write and read-only access.
The default community is the serial number of the instrument (same community for
read-only and for read-write).
Entering a community is mandatory.
Network and remote control settings