Rohde & Schwarz FSV3000, User Manual

Page: 158 / 1489

Measurements and results
R&S
®
FSVA3000/ R&S
®
FSV3000
158 User Manual 1178.8520.02 ─ 08
For "Fast ACLR" measurements, which are performed in the time domain, the power
versus time is shown for each channel.
Multi-standard radio (MSR) channel power results
The channel power results for MSR signals are described in Chapter 5.3.3.4, "Mea-
surement on multi-standard radio (MSR) signals" , on page 167.
Results are provided for the TX channel and the number of defined adjacent channels
above and below the TX channel. If more than one TX channel is defined, you must
specify the channel to which the relative adjacent-channel power values refer. By
default, it is the TX channel with the maximum power.
Table 5-8: Measurements performed depending on the number of adjacent channels
Number
of adj.
chan. Measurement results
0 Channel powers
1
●
Channel powers
●
Power of the upper and lower adjacent channel
2
●
Channel powers
●
Power of the upper and lower adjacent channel
●
Power of the next higher and lower channel (alternate channel 1)
3
●
Channel powers
●
Power of the upper and lower adjacent channel
●
Power of the next higher and lower channel (alternate channel 1)
●
Power of the second next higher and lower adjacent channel (alternate channel 2)
Channel power and adjacent-channel power (ACLR) measurement