Rohde & Schwarz FSV3000, User Manual

Page: 1025 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1025 User Manual 1178.8520.02 ─ 08
● General window commands ................................................................................1025
● Working with windows in the display ...................................................................1026
● Examples: configuring the result display .............................................................1033
12.6.1 General window commands
The following commands are required to configure general window layout, independent
of the application.
Note that the suffix <n> always refers to the window in the currently selected channel
(see
INSTrument[:SELect]
on page 853).
DISPlay:FORMat
......................................................................................................... 1025
DISPlay[:WINDow<n>]:SIZE
......................................................................................... 1025
DISPlay:FORMat <Format>
This command determines which tab is displayed.
Parameters:
<Format> SPLit
Displays the MultiView tab with an overview of all active chan-
nels
(See
Chapter 4.2, "R&S multiview" , on page 126).
SINGle
Displays the measurement channel that was previously focused.
*RST:
SING
Example: DISP:FORM SPL
DISPlay[:WINDow<n>]:SIZE <Size>
This command maximizes the size of the selected result display window temporarily .
To change the size of several windows on the screen permanently, use the
LAY:SPL
command (see
LAYout:SPLitter
on page 1029).
Suffix:
<n>
.
Window
Parameters:
<Size> LARGe
Maximizes the selected window to full screen.
Other windows are still active in the background.
SMALl
Reduces the size of the selected window to its original size.
If more than one measurement window was displayed originally,
these are visible again.
*RST:
SMALl
Example: DISP:WIND2:SIZE LARG
Configuring the result display