manualshive.com logo in svg

Rohde & Schwarz FSV3000, User Manual

Share
Download
Rohde & Schwarz FSV3000 User Manual Download Page 815

Network operation and remote control

R&S

®

FSVA3000/ R&S

®

FSV3000

815

User Manual 1178.8520.02 ─ 08

"MAC address" Media Access Control address (MAC address), a unique identifier for

the network card in the R&S

 

FSV/A

"IP address"

IP address of the R&S

 

FSV/A as defined in the operating system (see

also 

"IP Address"

 

on page 807).

LAN Password

Password for LAN configuration. The default password is 

LxiWebIfc

.

Remote command: 

SYSTem:LXI:PASSword

 

on page 1329

LAN Reset

Resets the "LAN" configuration to its default settings (LCI function).

Parameter

Value

TCP/IP Mode

DHCP + Auto IP Address

Dynamic DNS

Enabled

ICMP Ping

Enabled

Password for "LAN" configuration

LxiWebIfc

Remote command: 

SYSTem:LXI:LANReset

 

on page 1329

11.6.5

 

HUMS settings

Available with option R&S

 

FSV/A-K980.

The R&S

 

FSV/A comes with a health and utilization monitoring system (HUMS) provid-

ing information about the R&S

 

FSV/A. Aim is to increase the overall utilization, to avoid

downtime and to increase the overall security level of a fleet of instruments.

HUMS provides, for example, information about:

●

Instrument identification, hardware components, software packages, licenses

●

Usage of remote control, usage via keyboard / mouse, usage of test applications

●

Hardware utilization and status, including S.M.A.R.T. data of the system drive

●

User-defined static information, for example, an inventory code

Interfaces and protocols

The HUMS installation on the R&S

 

FSV/A includes an SNMP agent and a REST ser-

vice with HTTP endpoints. So you can access the health and usage information via
LAN, using the SNMP protocol or the REST protocol. Accessing the data does not
interfere with remote control via SCPI commands or with measurement execution.

Reference information for both protocols is available on the R&S

 

FSV/A at the address

http://<instrument>/api/hums/v1/documents?name=<interface>

.

For 

<instrument>

, enter the hostname (e.g. 

fsva3030-123456

) or the IP address (e.g.

10.121.0.34

) of your instrument, as for access to the GUI.

Network and remote control settings

Summary of Contents for FSV3000


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands