Rohde & Schwarz FSV3000, User Manual

Page: 1040 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1040 User Manual 1178.8520.02 ─ 08
*RST: RF
Manual operation: See "Radio Frequency State" on page 357
12.7.1.2 Remote commands for external frontend control
The following commands are available and required only if the external frontend control
option (R&S
FSV3-K553) is installed.
Further commands for external frontend control described elsewhere:
●
INPut:SELect RF
; see
INPut<ip>:SELect
on page 1039
●
[SENSe:]FREQuency:CENTer
on page 1102
●
DISPlay[:WINDow<n>][:SUBWindow<w>]:TRACe<t>:Y[:SCALe]:RLEVel
on page 1116
●
INPut<ip>:ATTenuation:AUTO
on page 1118
●
INPut<ip>:ATTenuation
on page 1118
●
SYSTem:ERRor[:NEXT]?
on page 1343
● Commands for initial configuration ......................................................................1040
● Commands for test, alignment, and diagnosis ....................................................1047
● Format of selftest result file .................................................................................1049
● Programming example: configuring an external frontend ................................... 1053
Commands for initial configuration
The following commands are required when you initially set up an external frontend.
[SENSe:]EFRontend<fe>:CONNection[:STATe]
............................................................... 1040
[SENSe:]EFRontend<fe>:CONNection:CONFig
.............................................................. 1041
[SENSe:]EFRontend<fe>:CONNection:CSTate?
..............................................................1042
[SENSe:]EFRontend<fe>:FREQuency:BAND:COUNt?
.................................................... 1042
[SENSe:]EFRontend<fe>:FREQuency:BAND<b>:LOWer?
............................................... 1043
[SENSe:]EFRontend<fe>:FREQuency:BAND<b>:UPPer?
................................................1043
[SENSe:]EFRontend<fe>:FREQuency:BCONfig:LIST?
.................................................... 1043
[SENSe:]EFRontend<fe>:FREQuency:BCONfig:SELect
.................................................. 1044
[SENSe:]EFRontend<fe>:FREQuency:IFRequency?
....................................................... 1044
[SENSe:]EFRontend<fe>:FREQuency:REFerence
.......................................................... 1044
[SENSe:]EFRontend<fe>:FREQuency:REFerence:LIST?
.................................................1045
[SENSe:]EFRontend<fe>:IDN?
......................................................................................1045
[SENSe:]EFRontend<fe>:NETWork
............................................................................... 1045
[SENSe:]EFRontend[:STATe]
.........................................................................................1046
[SENSe:]EFRontend<fe>:CONNection[:STATe] <State>
Queries the external frontend connection state in the firmware.
Note: to query the physical connection state of the external frontend, use
[SENSe:
]EFRontend<fe>:CONNection:CSTate?
on page 1042.
Setting basic measurement parameters