Rohde & Schwarz FSV3000, User Manual

Page: 1376 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1376 User Manual 1178.8520.02 ─ 08
SYSTem:PSA:WIDeband <State>
This command defines which option is returned when the
*OPT?
query is executed,
depending on the state of the wideband option.
It is only available for PSA89600 emulation.
Parameters:
<State> ON | OFF | HIGH
OFF
The option is indicated as "B7J"
ON
The 40 MHz wideband is used.
The option is indicated as "B7J, 140".
HIGH
The 80 MHz wideband is used.
The option is indicated as "B7J, 122".
*RST:
OFF
Manual operation: See "Language" on page 811
See "Wideband" on page 813
SYSTem:REVision[:STRing] <Name>
Sets the response to the
REV?
query to the defined string (HP emulation only, see
SYSTem:LANGuage
on page 1375).
Parameters:
<Name>
Example: Define the system language:
SYST:LANG '8563E'
Query the revision:
REV?
Response:
920528
Set the response to 'NewRevision':
SYST:REV:STR 'NewRevision'
Query the response:
SYST:REV:STR?
Response:
NewRevision
Manual operation: See "Revision String" on page 813
SYSTem:RSWeep <State>
Controls a repeated sweep of the E1 and MKPK HI HP model commands (for details
on the commands refer to
Chapter 12.13.2, "Reference: GPIB commands of emulated
HP models" , on page 1377). If the repeated sweep is OFF, the marker is set without
sweeping before.
Emulating other instruments' commands