Rohde & Schwarz FSV3000, User Manual

Page: 1073 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1073 User Manual 1178.8520.02 ─ 08
NOACtion
Nothing is started on pressing the micro button.
Manual operation: See "Microbutton Action" on page 362
[SENSe:]PROBe<pb>:SETup:NAME?
Queries the name of the probe.
Suffix:
<pb>
.
1..n
Selects the connector:
3 = RF
Return values:
<Name> String containing the name of the probe.
Example: //Query name of the probe
PROB3:SET:NAME?
Usage: Query only
Manual operation: See "Name" on page 360
[SENSe:]PROBe<pb>:SETup:NMOFfset <NMOffset>
Sets the N-mode offset. The setting is only available if a modular probe in N-mode is
connected to the R&S
FSV/A. The maximum voltage difference between the positive
and negative input terminals is 16 V.
If the probe is disconnected, the N-mode offset of the probe is reset to 0.0 V.
Note that if the offset for DM-mode or CM-mode is changed, the offsets for the P-mode
and N-mode are adapted accordingly, and vice versa.
For details see "Multimode function and offset compensation for modular RF probes"
on page 354.
Suffix:
<pb>
.
1..n
Selects the connector:
3 = RF
Parameters:
<NMOffset> The voltage offset between the negative input terminal and
ground.
Default unit: V
Manual operation: See "Common Mode Offset / Diff. Mode Offset / P Offset / N Off-
set /" on page 361
[SENSe:]PROBe<pb>:SETup:PMODe <Mode>
Determines the mode of a multi-mode modular probe.
Setting basic measurement parameters