Rohde & Schwarz FSV3000, User Manual

Page: 965 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
965 User Manual 1178.8520.02 ─ 08
ON | 1
The R&S FSV/A stops after measuring one range, and the sta-
tus bit number 10 in the
STAT:OPER
register is set.
(See Chapter 11.2.2.4, "STATus:OPERation register" ,
on page 781.)
To continue with the next range, use
INITiate<n>:CONMeas
.
OFF | 0
The R&S FSV/A sweeps all ranges in one go.
*RST: 0
Example: LIST:RANG2:BRE ON
Manual operation: See "Stop After Sweep" on page 277
[SENSe:]LIST:RANGe<ri>:COUNt?
This command queries the number of ranges in the sweep list.
Suffix:
<ri>
.
irrelevant
Return values:
<Ranges> Number of ranges in the sweep list.
Example: LIST:RANG:COUN?
Usage: Query only
[SENSe:]LIST:RANGe<ri>:DELete
This command removes a range from the sweep list.
Note that
●
you cannot delete the reference range
●
a minimum of three ranges is mandatory.
Suffix:
<ri>
.
1..n
Selects the measurement range.
Example: LIST:RANG2:DEL
[SENSe:]LIST:RANGe<ri>:DETector <Detector>
This command selects the detector for a spurious emission measurement range.
Suffix:
<ri>
.
1..n
Selects the measurement range.
Parameters:
<Detector> APEak
Autopeak
Configuring and performing measurements