Rohde & Schwarz FSV3000, User Manual

Page: 970 / 1489

Remote commands
R&S
®
FSVA3000/ R&S
®
FSV3000
970 User Manual 1178.8520.02 ─ 08
Parameters:
<Level> Absolute limit at the stop frequency of a SEM range.
Range:
-400 to 400
*RST: 13
Default unit: dBm
Example: LIST:RANG2:LIM:STOP 200
Manual operation: See "Abs Limit Start/ Abs Limit Stop" on page 278
[SENSe:]LIST:RANGe<ri>:POINts[:VALue] <Points>
This command defines the number of sweep points in a spurious emission measure-
ment range.
Suffix:
<ri>
.
1..n
Selects the measurement range.
Parameters:
<Points> For more information on sweep points see Chapter 6.5.1.8,
"How much data is measured: sweep points and sweep count" ,
on page 469.
*RST:
1001
Example: LIST:RANG2:POIN 1000
Manual operation: See "Sweep Points" on page 277
[SENSe:]LIST:RANGe<ri>:RLEVel <RefLevel>
This command defines the reference level for a spurious emission measurement
range.
Suffix:
<ri>
.
1..n
Selects the measurement range.
Parameters:
<RefLevel> Reference level.
Refer to the data sheet for the reference level range.
*RST:
0 dBm
Default unit: dBm
Example: LIST:RANG2:RLEV 1DBM
Manual operation: See "Reference Level" on page 277
[SENSe:]LIST:RANGe<ri>:SWEep:TIME <SweepTime>
This command defines the sweep time for a spurious emission measurement range.
Configuring and performing measurements