manualshive.com logo in svg

Rohde & Schwarz FSV3000, User Manual

Share
Download
Rohde & Schwarz FSV3000 User Manual Download Page 90

Getting started

R&S

®

FSVA3000/ R&S

®

FSV3000

90

User Manual 1178.8520.02 ─ 08

3.4.9

 

Saving settings

To restore the results of our measurements later, we will store the instrument settings
to a file.

To save the instrument settings to a file

1.

Tap the "Save" icon in the toolbar.

2.

Press the keyboard key on the front panel to display the online keyboard, as you
will have to enter text in the next step.

3. In the "Save" dialog box, tap the "File Name" field and enter 

MyMultiViewSetup

using the keyboard.
Keep the default "File Type" setting "Instrument with all Channels" to store the con-
figuration of all channels.

Trying out the instrument

Summary of Contents for FSV3000


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands